Perfect fit
Using laser technology, the film is cut perfectly to fit the components of your vehicle. Perfect fit and almost invisible.
Perfect cut
Using laser technology, the film is cut perfectly to fit the components of your vehicle. Perfect fit and almost invisible.
Simple wet installation
- Use the PianoCleaner liquid and a microfiber cloth to thoroughly clean the selected interior part .
- Use the PianoSkin Installer - spray it thoroughly onto the entire surface of the object on which the PianoSkin film is to be applied.
- Using the START sheet, remove all primer layers marked with a red circular sticker.
- Use the PianoSkin Installer - spray it thoroughly on the unsealed part of the film.
- Carefully place the film on the part. The gel used allows for precise positioning.
- Remove the stabilizing platforms so that the previously laid film is not deformed. If you are laying the film without the platforms, skip this point.
- Use a squeegee - with a firm motion from the center outwards, work the gel out from under the film. Do not press the squeegee too hard as this can damage the adhesive, ultimately affecting the final result.
- Remove the next coat of primer and repeat the process from step 4.
- Carefully clean the taped part and remove any excess glue. Use a cloth and PianoCleaner. Be careful not to peel off the newly applied film.
- Wait for the final result, the glue needs 12 to 24 hours to relax, depending on the prevailing conditions.
Removes fingerprints and scratches
Thanks to its elasticity, PianoSkin fills in small scratches and makes them less visible. The matte surface minimizes the visibility of fingerprints and dirt stains. Veneered parts remain clean and protected.
Contents of the PianoSkin kit:
1x set of Grizz PianoSkin films
1x Grizz Piano Cleaner
1x Grizz PianoInstaller assembly gel
1x microfiber cloth
1x pair of gloves for assembly
1x scraper
